Professional Sodium Metasilicate Deck & Fence Cleaner (Step 1 System)
Deep Clean. Mild Strip. Restore Properly.
EXPERT Wood Cleaner™ is a professional-grade alkaline wood cleaner formulated with 100% sodium metasilicate. It is engineered for deck and fence restorations that require deep cleaning and controlled mild stripping, without the harshness of aggressive solvent strippers.
This is our go-to solution when wood needs more than a rinse but does not require full coating removal.
Part of the Fence Armor™ 3-Step Wood Restoration System.
Description
What It Does
When activated with water, EXPERT Wood Cleaner™ penetrates wood fibers to lift and break down:
✔ Embedded dirt and grime
✔ Mold, mildew, and algae staining
✔ Organic growth residue
✔ Oxidation and weathering
✔ Some failing semi-transparent stains
✔ Lumber mill grade stamps
It cleans deeper than oxygenated cleaners and provides mild stripping action to properly prepare wood for brightening and staining.
Why Sodium Metasilicate?
Trusted by restoration contractors, sodium metasilicate breaks down organic contamination, lifts failing coatings, and prepares wood for brightening and staining.
100% Sodium Metasilicate. No fillers.
Ideal Applications
• Deck restoration
• Fence restoration
• Pergolas
• Exterior wood siding
• Oxidized or weathered wood
• Pre-stain surface preparation
Not designed to remove intact paint, solid stain, or heavy film-forming coatings.
Mixing Instructions
Light Cleaning:
1/4 cup per gallon of water
Medium Cleaning:
1/2 cup per gallon
Heavy Restoration / Mild Stripping:
1 cup per gallon
• Stir thoroughly until dissolved
• Keep the surface wet during dwell time
• Do not allow the product to dry on wood
• Use within 6 hours of mixing
Application Guidelines
Pre-wet the surrounding plants and wood. Apply with a pump sprayer or brush, allow 5–20 minutes dwell time, agitate if needed, then rinse thoroughly using the lowest effective pressure.
Important: Always Brighten After Cleaning
Wood Cleaner™ is alkaline and must be neutralized.
Always follow with:
Stain & Seal Wood Brightener (Step 2)
This restores natural wood tone and balances pH before staining.
Allow wood to dry 48–72 hours before applying stain.
Moisture content must be 13% or lower before coating.
Safety
Wear gloves, eye protection, and a respirator. Keep out of reach of children. Do not ingest or mix with other chemicals. Wet surrounding vegetation before and after use.
Professional Restoration Starts With Proper Prep
Fence Armor™ 3-Step System:
Step 1 – Wood Cleaner™ (Deep Clean + Mild Strip)
Step 2 – Wood Brightener
Step 3 – Stain & Seal Application
Restore properly before you protect.
FAQ
What’s the difference between Eco Cleaner™ and Wood Cleaner™?
Eco Cleaner™ (sodium percarbonate) removes organic growth like mold and algae with oxygenated action.
Wood Cleaner™ (sodium metasilicate) is a stronger alkaline cleaner that also provides mild stripping action and deeper stain lifting.
Use Eco Cleaner for organic stain removal. Use Wood Cleaner for heavier restoration or when light stripping is needed.
Will this remove the old stain?
It can remove failing semi-transparent stains and surface contamination.
It is not designed to remove intact paint, solid stain, or heavy film-forming coatings.
Do I need to use a brightener after this cleaner?
Yes, Wood Cleaner™ is alkaline and must be neutralized with a Wood Brightener (Step 2) to restore natural wood color and balance pH before staining.
Is this safe for plants?
When used as directed and rinsed thoroughly, it is safe for surrounding vegetation.
Always pre-wet and post-rinse plants before and after application.
How strong should I mix it?
Light cleaning: 1/4 cup per gallon
Medium cleaning: 1/2 cup per gallon
Heavy restoration: 1 cup per gallon
Adjust strength based on wood condition.
Can I pressure wash after applying?
Yes, but use the lowest effective pressure to avoid wood damage.
Use a pendulum motion and avoid stopping in one area.
EXPERT Professional Wood Care products do not and cannot guarantee to kill or eliminate organic growth, mold, mildew, algae, and other microorganisms from the use of our EXPERT 3-Step System. The EXPERT Professional Wood Care products have not been certified by the Environmental Protection Agency
Professional Sodium Metasilicate Deck & Fence Cleaner (Step 1 System)
Deep Clean. Mild Strip. Restore Properly.
EXPERT Wood Cleaner™ is a professional-grade alkaline wood cleaner formulated with 100% sodium metasilicate. It is engineered for deck and fence restorations that require deep cleaning and controlled mild stripping, without the harshness of aggressive solvent strippers.
This is our go-to solution when wood needs more than a rinse but does not require full coating removal.
Part of the Fence Armor™ 3-Step Wood Restoration System.
Description
What It Does
When activated with water, EXPERT Wood Cleaner™ penetrates wood fibers to lift and break down:
✔ Embedded dirt and grime
✔ Mold, mildew, and algae staining
✔ Organic growth residue
✔ Oxidation and weathering
✔ Some failing semi-transparent stains
✔ Lumber mill grade stamps
It cleans deeper than oxygenated cleaners and provides mild stripping action to properly prepare wood for brightening and staining.
Why Sodium Metasilicate?
Trusted by restoration contractors, sodium metasilicate breaks down organic contamination, lifts failing coatings, and prepares wood for brightening and staining.
100% Sodium Metasilicate. No fillers.
Ideal Applications
• Deck restoration
• Fence restoration
• Pergolas
• Exterior wood siding
• Oxidized or weathered wood
• Pre-stain surface preparation
Not designed to remove intact paint, solid stain, or heavy film-forming coatings.
Mixing Instructions
Light Cleaning:
1/4 cup per gallon of water
Medium Cleaning:
1/2 cup per gallon
Heavy Restoration / Mild Stripping:
1 cup per gallon
• Stir thoroughly until dissolved
• Keep the surface wet during dwell time
• Do not allow the product to dry on wood
• Use within 6 hours of mixing
Application Guidelines
Pre-wet the surrounding plants and wood. Apply with a pump sprayer or brush, allow 5–20 minutes dwell time, agitate if needed, then rinse thoroughly using the lowest effective pressure.
Important: Always Brighten After Cleaning
Wood Cleaner™ is alkaline and must be neutralized.
Always follow with:
Stain & Seal Wood Brightener (Step 2)
This restores natural wood tone and balances pH before staining.
Allow wood to dry 48–72 hours before applying stain.
Moisture content must be 13% or lower before coating.
Safety
Wear gloves, eye protection, and a respirator. Keep out of reach of children. Do not ingest or mix with other chemicals. Wet surrounding vegetation before and after use.
Professional Restoration Starts With Proper Prep
Fence Armor™ 3-Step System:
Step 1 – Wood Cleaner™ (Deep Clean + Mild Strip)
Step 2 – Wood Brightener
Step 3 – Stain & Seal Application
Restore properly before you protect.
FAQ
What’s the difference between Eco Cleaner™ and Wood Cleaner™?
Eco Cleaner™ (sodium percarbonate) removes organic growth like mold and algae with oxygenated action.
Wood Cleaner™ (sodium metasilicate) is a stronger alkaline cleaner that also provides mild stripping action and deeper stain lifting.
Use Eco Cleaner for organic stain removal. Use Wood Cleaner for heavier restoration or when light stripping is needed.
Will this remove the old stain?
It can remove failing semi-transparent stains and surface contamination.
It is not designed to remove intact paint, solid stain, or heavy film-forming coatings.
Do I need to use a brightener after this cleaner?
Yes, Wood Cleaner™ is alkaline and must be neutralized with a Wood Brightener (Step 2) to restore natural wood color and balance pH before staining.
Is this safe for plants?
When used as directed and rinsed thoroughly, it is safe for surrounding vegetation.
Always pre-wet and post-rinse plants before and after application.
How strong should I mix it?
Light cleaning: 1/4 cup per gallon
Medium cleaning: 1/2 cup per gallon
Heavy restoration: 1 cup per gallon
Adjust strength based on wood condition.
Can I pressure wash after applying?
Yes, but use the lowest effective pressure to avoid wood damage.
Use a pendulum motion and avoid stopping in one area.
EXPERT Professional Wood Care products do not and cannot guarantee to kill or eliminate organic growth, mold, mildew, algae, and other microorganisms from the use of our EXPERT 3-Step System. The EXPERT Professional Wood Care products have not been certified by the Environmental Protection Agency
What the Pros Think of Fence Armor® Post Protector Products
