Turn 5-minute hand staining into 30-second production.
The EXPERT Stain & Paint Machine is a European-engineered gravity-fed staining machine designed to coat up to six sides of lumber in a single pass, with no electricity, no pumps, and no overspray.
Built for contractors who care about profit margins, efficiency, speed, and flawless results.
Free Shipping for orders in the Continental USA
Product Description
Professional 6-Side Staining & Pre-Stain Machine
The EXPERT Stain & Paint Machine is a precision-engineered wood finishing machine designed for:
• Fence staining
• Deck board staining
• Tongue-and-groove siding
• Pre-stain lumber processing
• Trim and siding finishing
• Paint and primer application
• Commercial lumber finishing
This gravity-fed system handles lumber up to 3.54” tall × 11.81” wide × 20’+ long, delivering uniform stain penetration and back-brushed coverage in seconds. The Top Hopper (Holding Tank) holds 3.5 US Gallons.
Unlike pump-driven pocket systems or overspray sprayers, this machine:
✔ Coats up to six sides in one pass
✔ Penetrates deep into wood grain
✔ Eliminates overspray and airborne waste
✔ Requires no motors or compressors
✔ Works rain or shine, anywhere
Pure gravity. Zero mechanical complexity.
What Is a Gravity-Fed Staining Machine?
A gravity-fed staining machine is a mechanical lumber finishing system that applies stain or paint using controlled flow instead of pumps or spray pressure. Unlike pump-driven pocket machines, a gravity-fed system delivers consistent coverage with fewer moving parts, less maintenance, and no electrical requirements.
The EXPERT system is one of the most efficient commercial gravity-fed pre-stain machines available for fence pickets, deck boards, siding, and trim.
Built for Production and Profit
Traditional hand staining can take 3–5 minutes per 16’ board.
With the EXPERT system, contractors can process a 16’ board in roughly 30 seconds and produce up to 650 linear feet per hour with a two-person crew, depending on material size and setup.
That means:
• Faster project completion • Lower labor cost per job • More consistent finish quality • Less wasted stain or paint • Better production capacity • Higher profit potential
For many contractors, one large fencing, decking, or siding project can offset a significant portion of the machine investment.
Designed for Stain & Paint Applications
Originally developed for professional painters, the EXPERT system is more than a fence-staining machine. It is a complete lumber-finishing system.
Designed in Germany and manufactured in Italy, the EXPERT Stain & Paint Machine is built for real jobsite use.
Features include:
• Powder-coated and zinc-coated steel frame • Tool-free wing-bolt assembly • Adjustable roller and brush system • Gravity-fed top hopper • Built-in stain recycling system • 6 rollers and 12 back-brushing brushes • No pumps, motors, compressors, or electrical components
Easy Cleanup & Maintenance
After use, the machine disassembles in minutes with no tools required.
Simply wipe down the frame, clean rollers and brushes based on the coating used, and store components properly between jobs.
Replacement rollers and brushes are available to keep your system performing like new.
Featured Video
Stain Machine Assembly Instructions video
FAQ
How many sides does the EXPERT Stain & Paint Machine coat?
The machine is engineered to coat up to six sides of lumber in one pass using rollers and back-brushing brushes.
Does the machine require electricity?
No. The EXPERT system is completely gravity-fed. It requires no motors, pumps, compressors, or electrical setup.
Can it be used as a pre-stain machine?
Yes. It is commonly used to pre-stain fence pickets, deck boards, siding, trim, and other lumber before installation.
What coatings can it apply?
It can apply oil-based stains, water-based stains, primers, latex paints, acrylic coatings, and polyurethanes.
Is overspray an issue?
No. The system uses controlled roller saturation and back-brushing instead of airborne spraying, reducing material waste and mess.
How much production can I expect?
With a two-person crew, production can reach up to 650 linear feet per hour depending on board size, coating type, and setup.
Is this only for contractors?
No. It is designed for professionals, but serious DIY builders with large fence, deck, siding, or cabin projects can also benefit from the time savings.
Turn 5-minute hand staining into 30-second production.
The EXPERT Stain & Paint Machine is a European-engineered gravity-fed staining machine designed to coat up to six sides of lumber in a single pass, with no electricity, no pumps, and no overspray.
Built for contractors who care about profit margins, efficiency, speed, and flawless results.
Free Shipping for orders in the Continental USA
Product Description
Professional 6-Side Staining & Pre-Stain Machine
The EXPERT Stain & Paint Machine is a precision-engineered wood finishing machine designed for:
• Fence staining
• Deck board staining
• Tongue-and-groove siding
• Pre-stain lumber processing
• Trim and siding finishing
• Paint and primer application
• Commercial lumber finishing
This gravity-fed system handles lumber up to 3.54” tall × 11.81” wide × 20’+ long, delivering uniform stain penetration and back-brushed coverage in seconds. The Top Hopper (Holding Tank) holds 3.5 US Gallons.
Unlike pump-driven pocket systems or overspray sprayers, this machine:
✔ Coats up to six sides in one pass
✔ Penetrates deep into wood grain
✔ Eliminates overspray and airborne waste
✔ Requires no motors or compressors
✔ Works rain or shine, anywhere
Pure gravity. Zero mechanical complexity.
What Is a Gravity-Fed Staining Machine?
A gravity-fed staining machine is a mechanical lumber finishing system that applies stain or paint using controlled flow instead of pumps or spray pressure. Unlike pump-driven pocket machines, a gravity-fed system delivers consistent coverage with fewer moving parts, less maintenance, and no electrical requirements.
The EXPERT system is one of the most efficient commercial gravity-fed pre-stain machines available for fence pickets, deck boards, siding, and trim.
Built for Production and Profit
Traditional hand staining can take 3–5 minutes per 16’ board.
With the EXPERT system, contractors can process a 16’ board in roughly 30 seconds and produce up to 650 linear feet per hour with a two-person crew, depending on material size and setup.
That means:
• Faster project completion • Lower labor cost per job • More consistent finish quality • Less wasted stain or paint • Better production capacity • Higher profit potential
For many contractors, one large fencing, decking, or siding project can offset a significant portion of the machine investment.
Designed for Stain & Paint Applications
Originally developed for professional painters, the EXPERT system is more than a fence-staining machine. It is a complete lumber-finishing system.
Designed in Germany and manufactured in Italy, the EXPERT Stain & Paint Machine is built for real jobsite use.
Features include:
• Powder-coated and zinc-coated steel frame • Tool-free wing-bolt assembly • Adjustable roller and brush system • Gravity-fed top hopper • Built-in stain recycling system • 6 rollers and 12 back-brushing brushes • No pumps, motors, compressors, or electrical components
Easy Cleanup & Maintenance
After use, the machine disassembles in minutes with no tools required.
Simply wipe down the frame, clean rollers and brushes based on the coating used, and store components properly between jobs.
Replacement rollers and brushes are available to keep your system performing like new.
Featured Video
Stain Machine Assembly Instructions video
FAQ
How many sides does the EXPERT Stain & Paint Machine coat?
The machine is engineered to coat up to six sides of lumber in one pass using rollers and back-brushing brushes.
Does the machine require electricity?
No. The EXPERT system is completely gravity-fed. It requires no motors, pumps, compressors, or electrical setup.
Can it be used as a pre-stain machine?
Yes. It is commonly used to pre-stain fence pickets, deck boards, siding, trim, and other lumber before installation.
What coatings can it apply?
It can apply oil-based stains, water-based stains, primers, latex paints, acrylic coatings, and polyurethanes.
Is overspray an issue?
No. The system uses controlled roller saturation and back-brushing instead of airborne spraying, reducing material waste and mess.
How much production can I expect?
With a two-person crew, production can reach up to 650 linear feet per hour depending on board size, coating type, and setup.
Is this only for contractors?
No. It is designed for professionals, but serious DIY builders with large fence, deck, siding, or cabin projects can also benefit from the time savings.
"I like the simple design of the machine. No motors or pumps to repair. Shipping was quick and the unit is basically fully assembled when it arrives. This thing is going to save us on material and labor."
— thomas s. (5/5)
Q&A
What the Pros Think of Fence Armor® Post Protector Products
