
Have a question about our products? Need a special size, or color? We are here to help.
Chat with us online, or give us a call.
We’re happy to help you.
Have a question about our products? Need a special size, or color? We are here to help.
Chat with us online, or give us a call.
We’re happy to help you.
All Fence Armor® Full Protection Post Protector products offer durable, environmentally-friendly, 365/360° post protection from weedwacker trimmer damage, pets, rodents and lawn-mowers. Reduce costly fence maintenance expenses when you choose the Fence Armor® Post Protector. Increase property curb appeal instantly with many premium powder-coated vinyl fence protector colors to choose from, such as white, black, clay, almond, redwood, brown and green. Sharing a fence with a neighbour just got a whole lot better. The Fence Armor® Post Protector mix ‘n’ match versatility, quickly and easily creates a uniquely beautiful, neighbor-friendly experience, on both sides of the fence. Another bonus to the Fence Armor® Post Protection is that if you would like a postprotector on your side of the fence, but your neighbor does not, the two-piece design makes that solution simple & easy.
The Fence Armor® Full Post Protection is a smart, two-piece design. Easily fit the most common 6x6 or 4x4 post and everything in-between; our metal post guard will fit around square and rectangular posts. Mixing ‘n’ Matching colors is so easy, and convenient with the vinyl fence protector. To install, the post protector 4x4 (or any other size), simply position the base of the post protector 4x4 at 1.˝ to 2.00˝ above ground level, and fasten. You can use one screw on the front and one on the back. Or, use all four screws, on each side of your Fence Armor® vinyl fence protector.
When installing the Fence Armor® postprotector on an existing fence post, we recommend stain or sealing, check out our Stain & Seal Experts wood stain line-up. Also be sure when using the Fence Armor® Post Protection that your bottom rail of your post is not lower to the ground than the height of the product.
View more on our Sizing & Installation page
Two of the most commonly sold post sizes are 4x4 and 6x6. So, is it any wonder that most think a standard postprotector 4x4 will fit their 4x4 posts. But did you know these are not their true sizes? If you measured a 4x4 post, you might find it ranges from 3.375˝ x 3.375˝ to 4.1875˝ x 4.1875˝. Be sure to measure your post before you order the 4x4 metal post guard. Fence Armor® Full Post Protection offers post protector sizes ranging from 3.00˝ x 3.00˝ up to 8.00˝ x 8.00˝ in addition to the 6x6, or 4x4 metal post sleeve.
Need something larger? Custom sizes are available.
Have a rectangular post? All Fence Armor’s engineered Full Post Protection, including the postprotector 4x4, is designed to fit both square and rectangular posts alike. All you have to do when ordering the vinyl fence protector is purchase the size that will fit the dimensional length of the face of the post. Then for installation of the postprotector, you put the guard on either side of the post and push them together, allowing them to overlap until the fit is snug. Once that is complete, you simply screw in each face of the vinyl fence protector and make sure to also screw in the sides that are overlapped. Simple and easy.
Prevent, protect, prolong the life of your posts today with the Fence Armor® Post Protectors. By trusting in the postprotector guards, you are ensuring that your posts are protected from the harsh elements, weed trimmer damage and more. Keep your fence posts beautiful for many years to come.
Have a question about our products? Need a special size, or color? We are here to help.
Chat with us online, or give us a call.
We’re happy to help you.
All Fence Armor® Pro Series Post Guard products offer durable, environmentally-friendly, 365/360° Protection from weedwacker trimmer damage, pets, rodents and lawn-mowers. Reduce costly fence maintenance expenses when you choose the Fence Armor® Pro Series Post Guard, for your fence, or as a mailbox post trimmer guard. Increase property curb appeal instantly with many premium powder-coated colors to choose from. Or, mix ’n’ match colors with Fence Armor’s patented two-piece design – ideal for neighbor-friendly fence situations. Or, if you have access to one side only, Fence Armor’s post guard products easily accommodate single post-side protection. Try the Pro Series Post Guard as a mailbox post trimmer guard, or as a post protector, or post shield on vinyl or wood privacy or 3-rail fences. No other post protector offers such versatility, durability, or recyclability.
The Fence Armor® Pro Series Post Guard, or mailbox post trimmer guard is a smart, two-piece design. Easily fit the common 6x6 or 4x4 mailbox post trimmer guard around square and rectangular posts. Use one-piece or both pieces. Mix ‘n’ Match colors easily for a convenient, and neighbor-friendly fence, too. To install, the Pro Series Post Guard, or mailbox post trimmer guard, simply position the post protector at 1.00˝ to 2.00˝ above ground level, and fasten. You can use two screws on the front and back pieces. Or, use all four screws, when you fasten one screw on either side of the post, in the side slots provided.
View more on our Sizing & Installation page
Two of the most commonly sold post sizes are 4x4 and 6x6. So it’s any wonder that most think a standard 4x4 Pro Series Post Guard will fit their 4x4 posts. But did you know these are not always their measured sizes? If you measured a 4x4 post, you might find it ranges from 3.375˝ x 3.375˝ to 4.1875˝ x 4.1875˝. Be sure to measure your post before you order any of our Pro Series Post Guard. Fence Armor® Pro Series Post Guard offers fence post and single mailbox post trimmer guard sizes ranging from 3.00˝ x 3.00˝ up to 8.00˝ x 8.00˝. Need something larger? Custom sizes are available. Have a rectangular post? All Fence Armor’s engineered Pro Series Post Guard is designed to fit both square and rectangular posts alike.
Have a question about our products? Need a special size, or color? We are here to help.
Chat with us online, or give us a call.
We’re happy to help you.
The Fence Armor® Demi Protection trimmer guard provides strong, environmentally-friendly, 365/360° Protection from weedwacker trimmer damage, from pets, rodents, and lawn-mowers. Reduce costly fence maintenance expenses when you choose a Fence Armor® Demi Protection trimmer guard. Increase property curb appeal instantly with many premium powder-coated colors to choose from. And, shared fences with neighbors just got a whole lot easier, too. With Fence Armor’s post protector mix ‘n’ match versatility, you can quickly and easily create a uniquely beautiful, neighbor-friendly experience on both sides of the fence.
The Fence Armor® Post Protector is a two-piece design that easily fits fence posts with low rail heights of 3.25˝, or lower. Mix ‘n’ Match colors easily and conveniently. Simply position the post protector 1.00˝ to 2.00˝ above ground level, and fasten to the post. Preventing, and protecting your wooden, or vinyl post from weedwacker damage will save you time, and money, making lawn, and fence maintenance, hassle and worry-free.
View more on our Sizing & Installation page
Two of the most common post sizes are 4x4 and 6x6. But did you know these are not always their true sizes? If you measured a 4x4 post, you might find it ranges from 3.375˝ x 3.375˝ to 4.1875˝ x 4.1875˝. Be sure to measure your post before you order any of our post protectors. Fence Armor® Demi Protection Post Protector offers post protector sizes ranging from 3.50˝ x 0.50˝ up to 7.50˝ x 0.50˝. Need something larger? Custom sizes are available. Two or three-sided posts, fence pickets, and more are never tricky or forgotten, with the Fence Armor® Demi Protection Post Protector trimmer guard.
Have a question about our products? Need a special size, or color? We are here to help.
Chat with us online, or give us a call.
We’re happy to help you.
Fence Armor’s unique slotted edge is the Round Post Protectors’ extendable feature, engineered for a custom fit on round wood posts of varying sizes. Fence Armor® Round Post Protectors provide a snug, indestructible barrier between the wood and potential damage caused by horse cribbing, and grass trimming on round posts. Easy-to-install, the round postguard protector is designed to extend the lifespan of both new and existing posts alike. Save hundreds of dollars on your fences’ maintenance repairs. Or even thousands on full post replacements with Fence Armor® Round Post Protectors.
When installing the post guards on round posts we also like to suggest using a block of wood (a 2x4 works great for this application) to keep consistent, especially when you have a whole length of field to do. Just remember, the Fence Armor® Round Post Protectors should be about an inch to an inch and a half above the ground. When you are ready to start securing the post protector to the round post, we suggest setting the center screw in about half way. By doing so, you can make the back half of the Fence Armor® slide underneath so that you can adjust it to the exact post diameter and then finish securing the middle screw into place. Once that is completed, you can line up the holes at the top and bottom and secure those into place. This makes for a simple and even easier installation.
To increase the diameter of protection, add a single round postguard, or multiple Round Post Protectors for even larger diameter posts. Affix the post collar with a galvanized, steel finish or powder-coated fastener on one end, and wrap the post collar around the post, affixing the extension piece with another fastener. Bring the two pieces together and fasten. It’s that simple.
View more on our Sizing & Installation page
Protect more. Better. Only Fence Armor® Round Post Protectors give the rural and agricultural communities the versatility they need. Install a post collar at the top and bottom of the post and deter the damaging effects of both horse cribbing and grass trimming. This single design postguard easily fits top or bottom on round posts and is extendible to fit any diameter of the post. From farm round fences to the extra-large hydro or telephone poles. Fence Armor® Round Post Protectors have you covered.
As with the other postguard protectors we offer, the Fence Armor® Round Post Protection comes in different colors - you can get it in the standard galvanized steel or in white or black. The premium powder-coat ensures for a long lasting, flawless finish. It can instantly beautify and strengthen any post. Trust in the Fence Armor® Round Post Protectors and make more time for other jobs and the things that matter, time with family and friends.
Have a question about our products? Need a special size, or color? We are here to help.
Chat with us online, or give us a call.
We’re happy to help you.
All Fence Armor® ornamental post protector strimmer guard products offer the same durable, environmentally-friendly, 365/360° Protection from weedwacker strimmer damage, pets, rodents and lawn-mowers. Reduce costly fence maintenance expenses dramatically and increase overall curb appeal instantly, when you choose the Fence Armor® ornamental strimmer guard post protector. Ideal for long lengths of metal fencing, a strimmer guard is most needed to prevent unsightly damage, saving you from hours, if not days of repair if sanding, and repainting damaged metal fencing. Use the Fence Armor® ornamental strimmer guard post protector on all new, or existing metal fencing, and prevent, protect, and prolong the life of your metal fences and gates. If you don’t have full access to the front and the back of the post, you can now try our new Demi Ornamental Strimmer Guard Post Protector, available now.
The Fence Armor® ornamental strimmer guard post protector is a smart, two-piece, click-lock design, meant to easily fit around square ornamental, metal posts for lasting beauty and protection. To install, the strimmer guard simply positions on the base of the strimmer guard at a .25˝ to 1.00˝ height above ground level, and click together. It’s that simple. If you don’t have full access around the post, try our new demi ornamental strimmer guard post protector.
View more on our Sizing & Installation page
Always measure before you buy. The ornamental strimmer guard post protector provides a snug fit, ensuring your posts are fully protected. If you don’t have full access around your posts, try the new demi ornamental strimmer guard post protector, available here.
Have a question about our products? Need a special size, or color? We are here to help.
Chat with us online, or give us a call.
We’re happy to help you.
Increased longevity with protective beauty. Fence Armor® Cap Claw™ decorative 4x4 post caps help reduce costly fence maintenance repairs or even whole-post replacements. The exposed end-grain at the top of the posts is what the Fence Armor® flexible, and decorative 4x4 Cap Claw™ post caps protect against. Regular fence maintenance and preventative, decorative 4x4 post caps, reduce exposure to the following:
We are very excited to introduce the newest addition to the Fence Armor® Cap Claw™ Fence Post Caps and Deck Post Caps line-up. The new fence post caps 6x6 will allow you to protect virtually any sized 6x6 post. Just like the decorative 4x4 post caps, the new fence post caps 6x6 will offer a wide selection of protection, flexing between 5 1/2˝ to 6 3⁄16˝. You can count on the Fence Armor® Cap Claw™ Fence Post Caps to offer a protection that can’t be compared. The premium powder-coating offers a beautiful curb appeal on any property and guarantees that it will withstand the test of time. Trust in the Fence Armor® Decorative Post Caps and you can protect and prolong the life of any fence, deck, pergola, porch, and more.
Add the Fence Armor® Cap Claw™
fence post caps, and deck post caps to all your new, and existing wood structures. The Cap Claw™ makes post top protection easy. It’s simple to slide it over the top of the post. And, once it’s on, it stays put. No fumbling with screws. The Cap Claw™ is engineered to hold securely, with sharp, three-pronged tips that grab on to each side of the post.
All Fence Armor® Cap Claw™ Fence Post Caps are also Deck Post Caps. Designed as a wholly integrated, fastener-free post cap, Fence Armor’s Cap Claw™ Fence Post Cap is the easiest, to install, and to up-grade, by adding any of the complementarily designed Fence Armor® Decorative Finials. They work beautifully with the 4x4 post cap and the fence post caps 6x6. Before installing your Cap Claw™ Fence Post Caps, or Deck Post Caps, release the top-screw from the top of the post cap, and instead, screw in your selected Decorative Finial, and slide your Fence Armor® Fence Cap Claw™ Post Caps, or Deck Post Caps over your pre-measured post. It’s that simple!
View more on our Sizing & Installation page
Two of the most common post sizes are 4x4 and 6x6. However, did you know these are not their true sizes? If you measured a 4x4 post, you might find it ranges from 3.375˝ x 3.375˝ to 4.1875˝ x 4.1875˝. Fence Armor® Cap Claw™ Fence Post Caps offers a single 4x4 size that fits any 4x4 post ever made ranging from 3⅜˝ to 4 3/16˝. Alongside the Fence Armor® Cap Claw™ fence post caps 6x6 that fits any 6x6 post ranging from 5 1/2˝ to 6 3⁄16˝.
Want to add another level of class, and sophistication – look at the Fence Armor® Decorative Finials. Six to choose from, all wholly, work seamlessly with Fence Armor® Cap Claw™ Fence Post Caps. Before installing the Fence Armor® Fence Post Caps, unfasten the screw at the top of the Cap Claw™ post cap, and replace it with any of the Fence Armor® Decorative Finials that match your unique aesthetic. Prevent, protect, and prolong your posts today!
Have a question about our products? Need a special size, or color? We are here to help.
Chat with us online, or give us a call.
We’re happy to help you.
Before installing the Fence Armor® Fence Post Caps, unfasten the screw at the top of the Fence Armor® post cap, and simply replace the screw with any of the Fence Armor® decorative fence post toppers that match your unique style. Then simply push the Fence Armor® Fence Post Cap with decorative fence post toppers down, over the post-end-grain you wish to protect, and you’re done. It’s that easy!
View more on our Sizing & Installation page
All Fence Armor® Decorative Finials work great with any other manufacturers’ existing fence post caps by drilling a ¼ ̋ hole on the cap's centre and affixing the Fence Armor® decorative fence post toppers with the 1/4˝-20 nut provided. Elevate the look of your new or existing metal, wood, or even vinyl post caps with Fence Armor® Decorative Finials.
Have a question about our products? Need a special size, or color? We are here to help.
Chat with us online, or give us a call.
We’re happy to help you.
Before installing the Fence Armor® Fence Post Caps, unfasten the screw at the top of the Fence Armor® post cap, and simply replace the screw with any of the Fence Armor® decorative fence post toppers that match your unique style. Then simply push the Fence Armor® Fence Post Cap with decorative fence post toppers down, over the post-end-grain you wish to protect, and you’re done. It’s that easy!
View more on our Sizing & Installation page
All Fence Armor® Decorative Finials work great with any other manufacturers’ existing fence post caps by drilling a ¼ ̋ hole on the cap's centre and affixing the Fence Armor® decorative fence post toppers with the 1/4˝-20 nut provided. Elevate the look of your new or existing metal, wood, or even vinyl post caps with Fence Armor® Decorative Finials.